Products Catalog

Premium grade, high temperature chain lubricant contains ALMASOL®, and other submicron lubricating solids dispersed in a special high temperature synthetic carrier. Suitable for application to hot chains without interrupting production operations. When used as directed, the carrier penetrates to all moving parts, leaving a protective film of lubricating solids as it cleanly volatilizes without residue at high temperatures. Will not gum or char, offering maximum migration into chain pins. Reduces frictional drag without building up hard deposits.

Lubrication Engineers operates under an ISO 9001 Certified Quality System.

Food Grade Lubricant Clings to Equipment, Providing Reliable Water-Resistant Protection from Oxidation, Rust & Wear

H1 Quinplex Synthetic Food Grade Oils (4032 and 4046, ISO 32 and 46, respectively) are NSF H1 registered, Kosher Pareve certified lubricants designed to use in food processing and other sensitive environments where superior antiwear, rust- and oxidation-resistant properties are required. Featuring 100% synthetic base oil, H1 Quinplex 4032 and 4046 have excellent load carrying abilities, can be used in low-temperature applications, and contain Quinplex®, LE’s proprietary impact-resistant additive.

Versatile Synthetic Provides Cool, Clean Performance

Monolec Syn Industrial Oil (9032-9150, 9220-9460) is designed to prolong equipment life by combating the effects of high temperatures, contamination and loads that accelerate wear. It is a versatile synthetic lubricant that meets or exceeds the requirements of gearboxes, air compressors, vacuum pumps, hydraulic systems, and roll mill bearings found in the textile, plastic, rubber and paper industries. It is formulated with high-viscosity 100 percent synthetic base oil and a specially developed additive package for applications running at extreme temperatures. The additive package provides outstanding thermal stability and rust and oxidation resistance as well as wear resistance as pressures and temperatures rise. A foam suppressant completes the package. The base oil and additive formulation works synergistically to reduce wear, extend oil drain intervals, reduce oil consumption, and practically eliminate deposits and sludge formation, all while providing excellent compatibility with seals.

Lubrication Engineers operates under an ISO 9001 Certified Quality System.

PAG Gear Oil Provides Ultimate Wear Protection, Corrosion Resistance and Thermal Stability

LE’s Duolec® PAG Gear Lubricant (9705-9707) is a PAG gear oil that has been specially formulated for the ultimate in corrosion resistance, wear protection and thermal stability. Polyalkylene glycol (PAG) lubricants are synthetic formulations known for their high viscosity index, extreme pressure (EP) properties, and ability to handle temperature extremes. In addition to the PAG base fluid, this formulation features Duolec®, LE’s proprietary dual-acting additive that provides both wear-reducing and EP protection.

Duolec PAG Gear Lubricant is an excellent choice for lubricating a variety of bearings and gears – particularly worm gears – as well as other equipment operating under extreme conditions.

High-Performance Synthetic Oil Provides Reliable, Long-Lasting Protection for Heavily Loaded Gearboxes

Duolec® Syn Gear Lubricant is formulated with 100 percent synthetic base fluid to ensure excellent high- and low-temperature performance. The synthetic base fluid also provides oxidation stability, which contributes to long lubricant life and a reduction in costly lubricant changeovers.

Duolec Syn Gear Lubricant provides uninterrupted operation and long service life for expensive gear applications, including heavily loaded gearboxes that are exposed to temperature extremes. With its special blend of clean gear technology additives, Duolec Syn Gear Lubricant works to prevent deposit formations in high-temperature applications and will not break down over time. The lubricant also provides exceptional low temperature flow properties, protecting gears during the coldest startups.

Featuring Duolec®, LE’s proprietary additive that reduces friction and increases oil film strength, Duolec Syn Gear Lubricant is able to withstand incredible loads and stresses from heavy-duty applications such as pulverizer gear units.

A pure synthetic oil for high temperature applications.

Chains and conveyors which operate in high temperature environments are extremely difficult to lubricate effectively. Even the very finest petroleum oils oxidize very rapidly as temperatures climb, leaving behind deposits which are detrimental to smooth, efficient chain and conveyor operation.

To meet this severe test of lubricant technology, LE developed 9963 SYNOLEC® Lubricant. As the name implies, this special product is pure synthetic. It leaves no deposits to cause chains to bind, jump the sprocket or break, or conveyor rollers to slide or bind.

Since 9963 SYNOLEC is an oil, it can be applied easily with standard equipment . . . spray, drip applicator, or brush.

Experience has proved that 9963 SYNOLEC actually cleans off old deposits left by ordinary petroleum lubricants, and its continued use keeps chains, conveyors and bearings operating smoothly.

One of the major factors causing rough chain and conveyor operation is rust and corrosion. 9963 SYNOLEC is rust and oxidation inhibited, another strong feature for this superior lubricant.

But a lubricant must do more than just resist high temperatures and keep metal surfaces clean. It must protect against premature wear. 9963 SYNOLEC possesses excellent lubricating qualities to reduce friction and wear. And it also contains MONOLEC®, LE's exclusive wear-reducing additive.

MONOLEC creates a single (mono-molecular) lubricating layer on the metal surface, vastly increasing film strength without affecting tolerances. Forming microscopic “ball bearings,” MONOLEC allows opposing surfaces to slide by one another, greatly reducing friction, heat and wear.

While 9963 SYNOLEC was originally developed as a high-temperature chain and conveyor lubricant, it is also appropriate for sealed-for-life bearings and other high-temperature applications where an oil may be used.

Lubrication Engineers operates under an ISO 9001 Certified Quality System.

Synthetic H2 Lubricant Penetrates Hot Oven Chains, Remains Thermally Stable & Reduces Energy Use

Monolec® High Temperature Oven Chain Lubricant (9965) is a specially formulated lubricant recommended for use on high-temperature oven chains, providing wear protection and lowering power consumption. It is a USDA H2 lubricant made of a synergistic blend of synthetic base fluids and high-performance additives, including Monolec, LE’s exclusive wear-reducing additive. The synthetic base fluids provide excellent thermal stability and low volatility characteristics at high temperatures, while the additives help the lubricant prevent friction, wear and corrosion.