Unique additives Techni Tips News

Products Catalog

Request Information

Semi-Synthetic Grease Protects Against Moisture & Other Harsh Conditions at Food Manufacturing Plants


H1 Quinplex® Food Machinery Lubricant (4025-4022) is a semi-synthetic grease suitable for a broad operating temperature range. In addition to being a food grade grease – NSF H1 registered for incidental food contact – it is also robust enough to withstand moisture, high temperatures, extreme pressures and other harsh conditions found at food manufacturing plants. It features an aluminum complex thickener base, providing extreme water resistance, excellent mechanical stability, reversibility and tackiness. Key additives include Quinplex, LE’s proprietary impact-resistant additive, and a rust and oxidation inhibitor. Switching to H1 Quinplex Food Machinery Lubricant results in longer bearing life, fewer equipment repairs, less downtime and lower lubricant consumption.

Unit of Measure

Benefits and Recommendations

Available Container Size

 N/A Quarter Drum

Buy this LE Product!

 N/A Don't See Pricing? Register Today!

GHS Statement

 N/A For commercial and professional use only

Beneficial Qualities

 N/A Food Grade
  • Formulated with high-viscosity pure food grade base oil
  • Registered NSF H1 for incidental food contact
  • Certified Kosher Pareve
  • Certified Halal by IFANCA
Water Resistant
  • Will not wash out or emulsify when coming in contact with water
  • Stays in contact zone, even in high moisture environments
    • Won’t wash out of bearings
  • Protects against rust and corrosion
Temperature Resistant
  • Performs well in a broad temperature range
  • Provides excellent service at moderately high temperatures
  • Will not melt or run from bearings
Extreme Pressure & Wear Resistant
  • Superior EP load-carrying capability
  • Exceptional anti-wear protection
  • Clings tenaciously to metal, resisting repeated impact
    • Won’t pound out or sling off
  • Exhibits long-lasting mechanical stability, does not change consistency after being worked thousands of times

Available Grades

 N/A
  • NLGI 2 (4025) – also available as an aerosol spray
  • NLGI 1 (4024)
  • NLGI 0 (4023)
  • NLGI 00 (4022)

Proprietary Additive

 N/A LE’s proprietary additives are used exclusively in LElubricants. H1 Quinplex®Food Machinery Lubricant contains Quinplex.

Quinplex® impact-resistant additive contributes to outstanding water resistance, tackiness and enhanced mechanical stability, and helps to form a barrier against corrosion.

Typical Applications

 N/A
  • Blenders
  • Bottle Washers
  • Cams
  • Carbonators
  • Conveyors
  • Cookers
  • Crowners
  • De-hairing Machines
  • Dividers
  • Electric Motors
  • Extractors
  • Feather Pickers
  • Filling Machines
  • Food Carts
  • Knives
  • Labelers
  • Mixers
  • Molders
  • O-Rings
  • Packaging Machines
  • Proofers
  • Saws
  • Sifters
  • Slicers
  • Slides
  • Wrappers

Performance Requirements Met or Exceeded

 N/A
  • NSF H1 registered for incidental food contact
  • Halal (certified by IFANCA)
  • Kosher Pareve
  • 4025 & 4024: Ex-Cell-O Corp-Pure-Pak Machine
  • 4025: General Mills - A Lubricant

Asset Reliability Solutions

 N/A Reliability Solution Products

Customer Testimonials

 N/A 4023 Borden Co Inc

Physical Characteristics - Typical

Thickener Type

 N/A Aluminum complex

Texture

 N/A Smooth Tacky

Color

 N/A White

NLGI Grade

 N/A 0

Performance Test Results

Worked 60 Penetration ASTM D217

 N/A 367

Dropping Point ºC(ºF), ASTM D2265

 N/A 214 (417)

Flash Point ºC (ºF), (COC), ASTM D92

 N/A 216 (421)

Viscosity @ 100°C, cSt, ASTM D445

 N/A 8.4

Viscosity @ 40°C, cSt, ASTM D445

 N/A 69.1

Pour Point °C (°F), ASTM D97

 N/A -30 (-22)

Oxidation drop in psi @ 100 hrs, ASTM D942

 N/A 5

Oxidation by PDSC minutes @ 155°C, ASTM D5483

 N/A >120

Corrosion Prevention DI H2O, ASTM D1743

 N/A Pass

Oil Separation 30 hrs @ 100ºC, % bleed, ASTM D6184

 N/A 10

Timken OK Load lbs, ASTM D2509

 N/A 40

Four-Ball EP Weld Point kgf, ASTM D2596

 N/A 400

Four-Ball EP Load Wear Index kgf, ASTM D2596

 N/A 65

SRV-EP 50°C, 1 mm stroke, 50 Hz frequency, ball on disc, max load w/o seizure, N, ASTM D5706

 N/A 1,200

Four-Ball Wear @ 75ºC, 1,200 rpm, 40 kgf, 60 minutes, mm wear, ASTM D2266

 N/A 0.49
Back to Top