Lubrication Engineers.Inc
Lubrication Engineers.Inc
110 Scorpion Trail St, Diepsloot, 2189
Contact Number: (011) 464 1735
Email address: info@lubricationengineers.co.za
Print Back
High-Performance Oil Delivers Superior Lubrication in High-Temperature, High-Load Applications

Duolec Industrial Gear Oil (1601-1610, 1302, 1304) is a high-performance industrial gear oil with ISO grades ranging from ISO VG 46 to 1500. Designed for use in any industrial gear or bearing application that requires a thermally stable, extreme pressure/antiscuff lubricant, it maintains performance even after filtration.

Duolec Industrial Gear Oil contains Duolec, LE’s dual acting additive that provides both wear-reducing and EP protection, and is fortified with a shear stable tackifier to provide adhesion to metal during use.
Unit of Measure

Benefits and Recommendations

Available Container Size

 N/A 2,100 lb Disposable Tank

Typical Applications

 N/A
  • Enclosed gearboxes
  • Bowl mills / pulverizers
  • Homogenizers
  • Planetary gears
  • Oil lubricated bearings

Beneficial Qualities

 N/A Maintains Performance in Extreme Conditions
  • Possesses high film strength
  • Remains stable despite high temps
  • Resists oxidation and sludge formation
  • Provides wear-reducing and EP/antiscuff protection
Adheres to Metal
  • Contains shear-stable tackifier that allows oil to adhere to metal components
  • Remains tacky during high shear use
Resists Moisture
  • Separates readily from water, continuing to provide effective lubrication
    • Ordinary gear oils will emulsify and foam, causing increased friction and poor lubrication
Filterable
  • Contains no solids that can be removed during filtration
  • Remains within viscosity grade after filtration

Performance Requirements Met or Exceeded

 N/A
  • ANSI/AGMA 9005-F16
  • AIST 224 (US Steel 224)
  • DIN 51517-3 CLP
  • ISO 12925-1 CKD
  • USDA H2

Asset Reliability Solutions

 N/A Reliability Solution Products

Proprietary Additives

 N/A LE’s proprietary additives are used exclusively in LE lubricants. Duolec® Vari-Purpose Gear Lubricant contains Duolec.

Duolec® dual-acting additive imparts synergistic properties to lubricants, providing both wear-reducing and extreme pressure protection. The result of revolutionary technology designed specifically for use in LE gear lubricants, Duolec increases oil film strength and is temperature activated to provide a protective layer that smooths metal surfaces and minimizes the effects of any contact, thereby reducing friction and preventing surface wear.

Physical Characteristics - Typical

Color

 N/A Purple

AGMA Grade

 N/A 7 EP

Viscosity @ 100°C, cSt, ASTM D445

 N/A 35.0

Viscosity @ 40°C, cSt, ASTM D445

 N/A 483.0

Viscosity Index ASTM D2270

 N/A 109

Flash Point ºC (ºF), (COC), ASTM D92

 N/A 210 (410)

Pour Point °C (°F), ASTM D97

 N/A -15 (-5)

Relative Density ASTM D1298

 N/A 0.887

Performance Test Results

Foaming Characteristics @ 24ºC/93.5ºC/24ºC, 3 sequences, ml of foam / time to break, ASTM D892

 N/A 0/0, 0/0, 0/0

Timken OK Load lbs (kgs), ASTM D2782

 N/A 75 (34)

Four-Ball Wear @ 75ºC, 1200 rpm, 40 kgf, 60 minutes, mm wear, ASTM D4172

 N/A 0.33

Rust Test 4 hrs @ 60ºC, Sea H2O, ASTM D665B

 N/A Pass