LE’s Earthwise™ lubricants are specifically formulated to be earth friendly while still meeting the rigorous demands of industrial applications. With these products, you can “go green” – and keep up with the latest environmental regulations – without having to sacrifice performance. Earthwise EAL Syn Hydraulic Oil is a certified Environmentally Acceptable Lubricant (EAL), recommended for use in applications
moreLE’s Earthwise™ lubricants are specifically formulated to be earth friendly while still meeting the rigorous demands of industrial applications. With these products, you can “go green” – and keep up with the latest environmental regulations – without having to sacrifice performance. Earthwise EAL Syn Hydraulic Oil is a certified Environmentally Acceptable Lubricant (EAL), recommended for use in applications on or near waterways. It meets the specifications required by the EPA’s Vessel General Permit (VGP). It is readily biodegradable, exhibits minimal aquatic toxicity and will not accumulate in the cells of fish and other aquatic life forms. In addition, the base oil used in this full synthetic formulation comes from renewable resources.
A long-lasting, nonfoaming fluid designed to protect the life of hydraulic pumps and motors, it offers excellent protection against cold temperatures and resists oxidation in high temperatures. It also withstands extreme pressure, prevents rust and corrosion, and separates from water.
less
Available Container Size |
N/A 330 gallon Poly w/ Cage |
Buy this LE Product! |
N/A Don't See Pricing? Register Today! |
Beneficial Qualities |
N/A
VGP Compliant
|
Performance Requirements Met or Exceeded |
N/A
|
Recommendation |
N/A This product should not be used for fire resistant hydraulic fluid applications. |
Typical Applications |
N/A
|
Relative Density @ 60ºF/60ºF, ASTM D1298 |
N/A 0.83 |
Viscosity @ 100°C, cSt, ASTM D445 |
N/A 6.04 |
Viscosity @ 40°C, cSt, ASTM D445 |
N/A 34.00 |
Viscosity Index ASTM D2270 |
N/A 124 |
Flash Point ºC (ºF), (COC), ASTM D92 |
N/A 239 (462) |
Pour Point °C (°F), ASTM D97 |
N/A -41 (-42) |
Rust Test 4 hrs @ 60ºC, Sea H2O, ASTM D665B |
N/A Pass |
Copper Corrosion 3 hrs @ 100ºC, ASTM D130 |
N/A 1b |
Oxidation by RPVOT @ 150ºC, minutes, ASTM D2272 |
N/A >1,000 |
Four-Ball Wear @ 75°C, 1200 rpm, 40 kgf, 60 minutes, mm wear, ASTM D4172 |
N/A <0.40 |
Emulsion Characteristics @ 54ºC, oil-water-emulsion/minutes, ASTM D1401 |
N/A 40-40-0/15 |
Foaming Characteristics @ 24ºC/93.5ºC/24ºC, 3 sequences, ml of foam / time to break, ASTM D892 |
N/A 0/0 |
Air Release 9.0-90.0 cSt @ 40ºC: 50ºC, minutes, ASTM D3427 |
N/A 2.00 |
Simulated NOACK TGA Method % loss, ASTM D6375 |
N/A <9.00 |
FZG Fail Stage, ASTM D5182 |
N/A 12 |
Biobased Content%, ASTM 6866 |
N/A >50 |
Readily Biodegradable Content %, OECD 301B |
N/A >90 |
Inherently Biodegradable Content %, OECD 301B |
N/A ≤5 |
Aquatic Toxicity mg/L, OECD 201 & 202 |
N/A >100 |
Bioaccumulating Content %, OECD 305 |
N/A 0 |
